Interlined drapes, as opposed to other kinds of drapes, generally have an inside lining of batting slipped in between the external decorative material and drapery interlining . Interlining is normally employed in drapes that possess a lightweight, transparent external fabric, to ensure that sunlight does not penetrate via the drapes. It can also be employed to offer help for delicate fabrics and to add shape. You can make your personal interlined drapes making use of a technique that is comparable to simple, lined drapes or curtains.
1.Measure the length and width you require for the drapes. Do this by measuring the curtain rod to obtain the width measurement, then measuring lower through the rod to obtain the length measurement.
2
Add ten inches towards length measurement. Multiply the width measurement by two and add 8 inches.
3
Cut your curtain material in the measurements from action 2. reduce your lining material and interlining batting in the length measurement minus 9 inches, and also the width measurement minus three inches.
4
Layer the lining and fusible interlining together, using the interlining touching the incorrect facet within the lining. Pin the layers in spot all along the edges. deal with it like a one layer.
5
Lay out the curtain material using the incorrect facet facing upward. Lay the lining layer on top of it, to ensure that the incorrect sides touch.
6
Adjust the lining layer to ensure that it sits one 1/2 inches through the sides within the curtain layer and four 1/2 inches through the bottom within the curtain layer.
7
Fold the facet edges within the curtain layer more than one inch, and then another one inch, to ensure that the lining layer is captured below the fold. Pin the fold towards lining layer.
8
Sew along the folded edges of every single side. metal the folds flat.
9
Fold the bottom borders within the curtain layer more than one inch, and then fold it more than another four inches, to ensure that the folded borders covers the lining layer. Pin the folded borders in place.
10
Sew along the folded borders to produce the drapery hem.
11
Fold the top borders within the curtain layer more than one inch, and then fold it more than another four inches.
12
Pin the folded borders towards lining layer and sew along the fold to produce the top borders within the curtain. metal the top borders flat.
13
Slide the curtain rod via the top borders within the curtain fabric, adjusting the width to fit.
No comments:
Post a Comment